LJE USB-C Power Interface

Introducing the LJE Products USB Power Interface Module. Sick of your communicator dying in the cold in the middle of your ride? You don’t have to worry anymore!

Works with Cardo, Sena, and other similar comm units that use the USB type C port for charging only. Does not work with Chatterbox, Uclear, Syhpon Sound, some Cardo units like PackTalk NEO, most older units or other brands that don’t stay on when being charged. You will need to provide your own USB adapter if you have a micro USB type connector. Requires DC voltage only. Older sleds produce AC voltage which will permanently damage the USB Power Module and your communicator. Read the disclaimer below before purchasing.

Designed with a contoured back with 3M adhesive, our USB module can be mounted to any helmet.

Simply reroute your accessory power cord’s male RCA jack to our USB module and now you can keep your Comm unit or action camera, heated shield, and Blizzard Buster powered as you ride. Our USB module is designed for cold wet weather.

It features a type C USB female port with a built in O-ring to keep moisture out. Our short flexible male to male type C power cord also has O-rings on each connector , keeping moisture out of your Comm unit’s USB port.

Can be used to power action cameras while riding as well.

Designed for snowmobilers by snowmobilers. No more batteries dying in the cold weather.

If you have an older comm unit with a micro-usb charger, you can order a short USB-C to micro usb cord to replace the one in our kit. Try Amazon for something like this.

WARNING: DO NOT USE WITH AN OLDER SNOWMOBILE THAT DOES NOT PRODUCE DC VOLTAGE. YOU MUST VERIFY THAT YOUR SNOWMOBILE IS SENDING DIRECT CURRENT (DC) THROUGH YOUR HEATED SHIELD CORD TO THE USB-C POWER INTERFACE BEFORE PLUGGING IN. FAILURE TO DO SO WILL RESULT IN PERMANENT DAMAGE TO THE UNIT AND YOUR COMMUNICATOR OR ACTION CAMERA. If you are not sure if your snowmobile is producing DC voltage, you can verify with a multimeter. Or if you’re currently using our Blizzard Buster and it is working, that means you are getting DC voltage.

LJE PRODUCTS IS NOT RESPONSIBLE FOR DAMAGE TO YOUR DEVICES FOR NOT FOLLOWING THIS WARNING.

• DOES NOT WORK WITH BRP OXYGEN OR ADVEX HELMETS