Precision EFI Stage 3 For Arctic Cat 9000 Series 280HP Pump Gas

Precision EFI Stage 3 For Arctic Cat 9000 Series 280HP Pump Gas

$649.99 CAD
$649.99 CAD

Available In Store Only

  • Fully secure checkout
  • Trusted by thousands
  • Rated and reviewed

Question about this product?

We're happy to help.

STAGE 3 - 280 HP

The Stage 3 adds 80hp over stock configuration.
It’s the ultimate performance flash using stock map sensor and injectors.

With this flash, you will get every single horsepower the stock system can safely deliver. 

Important: 
This Stage 3 Flash has been calibrated specifically for the stock air intake combined with the exhaust back pressure provided by our famous Stainless Steel Quiet 2.5 Exhaust.
Precision EFI ensures perfect operation of this Stage 3 only with this type of exhaust silencer with internal partitions. 
Any other too free flow exhaust such as race can or straight pipe could seriously damage your engine.


We highly suggest strong arms to hold the handles!

The Precision EFI knock system is include in all our reflash.

Perfect for the trail

Please take note that this power package requires the addition of some adjustable ramps in the primary clutch
Ramp adjustment starting point 
For a stock spring and helix combination in good condition, to achieve the target RPM. Please note; a modified spring and helix combination affects the final result. Therefore, we cannot provide settings for every application.

The test should be performed as follows: accelerate quickly but gradually to avoid track slippage. While accelerating, wait for the RPM to stabilize, then take an RPM reading. If the RPM is too high, add weight; if too low, reduce the weight. 
Note that surface conditions vary and affect RPM.

- Target RPM: 9000 
- Team Clutch : Adjustable Ramp Kit Dalton Qa2-76 empty
-Adapt Clutch : Adjustable Ramp Kit Dalton Qa3-65 set to a total of 66 g (use purple Loctite)
- A screw head flush with the top of the hole (at the heel) is the most common setting.